DTC U3000:4B [i-ELOOP]
id130201001600
|
DTC U3000:4B |
DC-DC converter (i-ELOOP) internal temperature malfunction |
|---|---|
|
DETECTION CONDITION
|
• A condition in which the DC-DC converter (i-ELOOP) internal temperature is abnormally high or low is detected.
|
|
FAIL-SAFE FUNCTION
|
• Not applicable
|
|
POSSIBLE CAUSE
|
• DC-DC converter (i-ELOOP) malfunction
|
|
SYSTEM WIRING DIAGRAM
|
• Not applicable
|
Diagnostic Procedure
|
STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY RELATED SERVICE INFORMATION AVAILABILITY
• Verify related Service Information availability.
• Is any related Service Information available?
|
Yes
|
Perform repair or diagnosis according to the available Service Information.
• If the vehicle is not repaired, go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
PERFORM DTC INSPECTION AND VERIFY DC-DC CONVERTER (i-ELOOP) MALFUNCTION
• Clear the DTC for the DC-DC converter (i-ELOOP) using the M-MDS.
(See CLEARING DTC [i-ELOOP].)
• Switch the ignition off.
• Switch the ignition ON (engine on) and wait for 5 s or more.
• Retrieve the DC-DC converter (i-ELOOP) DTCs using the M-MDS.
(See DTC INSPECTION [i-ELOOP].)
• Is the same DTC present?
|
Yes
|
Replace the DC-DC converter (i-ELOOP), then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [i-ELOOP].)
|
|
No
|
DTC troubleshooting completed.
|
||