SPEED SENSOR ASSY (TURBOCHARGER WITH VARIABLE TURBINE GEOMETRY) REMOVAL/INSTALLATION [SKYACTIV-D 1.5]

id0140q2498400

Warning

•  A hot engine and intake air system can cause severe burns. Turn off the engine and wait until they are cool before removing the intake-air system.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the following parts:

(1)  Engine cover (See ENGINE COVER REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

(2)  Fresh-air duct (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

(3)  Air cleaner (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

(4)  Battery and battery tray (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

(5)  Air inlet pipe, air hose and turbocharger air inlet hose (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [SKYACTIV-D 1.5].)

3.  Disconnect the turbocharger solenoid valve connector and move the connector to secure an operation space.

am3zzw00017554

4.  Disconnect the speed sensor assy connector of the turbocharger with variable turbine geometry.

5.  Remove the clip A from the bracket.

am3zzw00017555

6.  Remove the clip B from the bracket.

7.  Remove the nut.

8.  Remove the bolt.

am3zzw00017556

9.  Remove the speed sensor assy.

10.  Install in the reverse order of removal.