VACUUM HOSE REMOVAL/INSTALLATION
id041100801600
L.H.D.
1. Remove the battery. (Except MZR 1.6) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-D 1.5].) (See BATTERY REMOVAL/INSTALLATION [SKYACTIV-D 2.2].)
2. Pinch open the clamp using pliers and disconnect the vacuum hose.
|
3. Detach the vacuum hose from the clip.
|
4. For SKYACTIV-G 1.5 or SKYACTIV-G 2.0, perform the following procedure:
|
5. For MZR 1.6, perform the following procedure:
|
|
6. For SKYACTIV-D 1.5 or SKYACTIV-D 2.2, perform the following procedure:
|
7. Remove the vacuum hose.
8. Install in the reverse order of removal.
R.H.D.
1. Remove the windshield wiper arm and blade. (See WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION.)
2. Remove the cowl grille. (See COWL GRILLE REMOVAL/INSTALLATION.)
3. Remove the windshield wiper motor and link. (See WINDSHIELD WIPER MOTOR AND LINK REMOVAL/INSTALLATION.)
4. Remove the cowl panel. (See COWL PANEL REMOVAL/INSTALLATION.)
5. Pinch open the clamp using pliers and disconnect the vacuum hose.
|
6. For SKYACTIV-G 1.5, SKYACTIV-G 2.0 or SKYACTIV-G 2.5, perform the following procedure:
|
7. For MZR 1.6, perform the following procedure:
|
|
8. For SKYACTIV-D 1.5 or SKYACTIV-D 2.2, perform the following procedure:
|
9. Remove the vacuum hose.
10. Install in the reverse order of removal.