REAR CENTER SEAT BELT REMOVAL/INSTALLATION

id081100800900

Caution

•  If the retractor is disassembled, it will not operate correctly due to looseness and excessive play of the internal parts, therefore, do not disassemble the retractor.

4SD (Three-point Type Rear Center Seat Belt)

1.  Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the following parts:

(1)  Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

(2)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(3)  Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION.)

(4)  Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

(5)  C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(6)  Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION.)

3.  Remove the fastener.

am3zzw00015645

4.  Disconnect the connector.

5.  Remove the bolts.

am3zzw00015646

6.  Remove the rear center seat belt with the rear buckle (LH).

7.  Install in the reverse order of removal. (See Rear center seat belt installation note.)

Rear center seat belt installation note

1.  After installing the rear center seat belt, place it as shown in the figure.

am6xuw00005991

4SD (Two-point Type Rear Center Seat Belt)

1.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

2.  Remove the bolt.

am3zzw00015647

3.  Remove the rear center seat belt with the rear buckle (LH).

4.  Install in the reverse order of removal. (See Rear center seat belt installation note.)

Rear center seat belt installation note

1.  After installing the rear center seat belt, place it as shown in the figure.

am6xuw00005991

5HB (Three-point Type Rear Center Seat Belt)

Note

•  The rear center seat belt is building into the rear seat back.

1.  Disconnect the negative battery cable and wait for 1 min or more. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

3.  Remove the fastener.

am3zzw00015645

4.  Disconnect the connector.

5.  Remove the bolt.

am3zzw00015648

6.  Remove the rear seat back. (See REAR SEAT BACK REMOVAL/INSTALLATION.)

7.  Remove the rear seat back frame. (See REAR SEAT BACK FRAME REMOVAL/INSTALLATION.)

8.  Remove the nuts.

am3zzw00015649

9.  Remove the rear center seat belt from the rear seat back frame.

10.  Install in the reverse order of removal. (See Rear center seat belt installation note.)

Rear center seat belt installation note

1.  After installing the rear center seat belt, place it as shown in the figure.

am6xuw00005991

5HB (Two-point Type Rear Center Seat Belt)

1.  Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION.)

2.  Remove the bolt.

am3zzw00015647

3.  Remove the rear center seat belt with the rear buckle (LH).

4.  Install in the reverse order of removal. (See Rear center seat belt installation note.)

Rear center seat belt installation note

1.  After installing the rear center seat belt, place it as shown in the figure.

am6xuw00005991