DTC U2005:86 [HEADLIGHT AUTO LEVELING SYSTEM]
id0902i7017700
|
Description |
Error signal received from PCM |
|---|---|
|
Detection condition
|
• Auto leveling control module received the vehicle speed signal error from the PCM for 5 s or more with the ignition switched ON (engine off or on).
|
|
Fail-safe function
|
• The headlight leveling actuator is stopped at the position when the malfunction is determined.
|
|
Possible cause
|
• DTCs are stored in the PCM.
• PCM malfunction
• Auto leveling control module malfunction
|
|
System wiring diagram
|
Not applicable
|
Diagnostic Procedure
|
Step |
Inspection |
Action |
|
|---|---|---|---|
|
1
|
VERIFY PCM DTCs
• Retrieve the PCM DTCs using the M-MDS.
• Are any DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
(See DTC TABLE [SKYACTIV-D 1.5].)
(See DTC TABLE [SKYACTIV-D 2.2].)
(See DTC TABLE [MZR 1.6].)
|
|
No
|
Go to the next step.
|
||
|
2
|
PERFORM DTC INSPECTION AND VERIFY PCM MALFUNCTION
• Clear the DTC for the auto leveling control module using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 5 s or more.
• Retrieve the auto leveling control module DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Replace the PCM, then go to the next step.
|
|
No
|
Go to Step 4.
|
||
|
3
|
VERIFY THAT REPAIRS HAVE BEEN COMPLETED
• Clear the DTC for the auto leveling control module using the M-MDS.
• Switch the ignition ON (engine off or on) and wait for 5 s or more.
• Retrieve the auto leveling control module DTCs using the M-MDS.
• Is the same DTC displayed?
|
Yes
|
Repeat the inspection from Step 1.
• If the malfunction recurs, replace the auto leveling control module.
Go to the next step.
|
|
No
|
Go to the next step.
|
||
|
4
|
VERIFY IF OTHER DTCs DISPLAYED
• Are any other DTCs displayed?
|
Yes
|
Repair or replace the malfunctioning part according to the applicable DTC troubleshooting.
|
|
No
|
DTC troubleshooting completed.
|
||