BONNET REMOVAL/INSTALLATION

id091000407200

Warning

•  Always perform the procedure with at least another person to prevent the bonnet from falling. Otherwise, the bonnet may fall and cause injury.

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2.  Remove the bolts shown in the figure and remove the bonnet.

am3zzw00014333

3.  Remove the following parts:

(1)  Set plate (See SET PLATE REMOVAL/INSTALLATION.)

(2)  Front bumper (See FRONT BUMPER REMOVAL/INSTALLATION.)

(3)  Front combination light (See FRONT COMBINATION LIGHT REMOVAL/INSTALLATION.)

(4)  Front fender panel (See FRONT FENDER PANEL REMOVAL/INSTALLATION.)

4.  Remove the bolts shown in the figure and remove the bonnet hinge.

am3zzw00014334

5.  Install in the reverse order of removal.

6.  Perform the bonnet adjustment. (See BONNET ADJUSTMENT.)

7.  Adjust the headlight aiming. (See HEADLIGHT AIMING.)