GLOBAL POSITIONING SYSTEM (GPS) ANTENNA REMOVAL/INSTALLATION
id092000801500
Type A
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)
2. Remove the center speaker grille. (see SPEAKER GRILLE REMOVAL/INSTALLATION.)
3. Remove the screw.
|
4. Remove the GPS antenna.
5. Disconnect the connector.
6. Install in the reverse order of removal.
Type B
1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)
2. Remove the following parts:
3. While pressing the clip tabs in the direction of the arrows (1) shown in the figure, press the wiring harness in the direction of the arrow (2) to detach the clip tabs from the dashboard.
|
4. Remove the screw.
|
5. Remove the GPS antenna.
6. Install in the reverse order of removal.