PID/DATA MONITOR INSPECTION (i-stop) [SKYACTIV-D 2.2]

id1102a2000100

Note

•  PIDs related to i-stop can be displayed in a list using the M-MDS data monitor diagnostic function.

•  If the engine is stopped by the i-stop control while the following data monitor items on the M-MDS are being viewed, the data monitor items may no longer be displayed.

―  BRAKE_SW

―  BRK_F_P_C

―  LON_ACCL_C

―  WSPD_SEN_LF

―  WSPD_SEN_RF

―  WSPD_SEN_LR

―  WSPD_SEN_RR

1.  Connect the M-MDS to the DLC-2.

2.  After vehicle identification is completed, select the following from the M-MDS initial screen.

(1)  [Data logger]

(2)  [Powertrain]

(3)  [i-stop]

3.  Select the applicable item from the PID/DATA Monitor Table.

4.  Verify the monitored value according to the directions on the screen.

PID/DATA Monitor Table