DTC TABLE

• When DTCs not shown in the DTC table are displayed, perform the inspection for DTCs not shown in the DTC table. (See Inspection for DTCs not usually displayed so the related function is not equipped.)

DTC	System malfunction location	Fail-safe function	Drive cycle	Self test type^*1	Memory function	Page
B0001:11	19		17	Driver-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A.)
B0001:12	Driver-side air bag module circuit short to power supply	—	—	C, D	×
B0001:13	Driver-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0001:19	Short circuit to driver-side air bag module and other air bag module circuits	—	—	C, D	×
B0001:1A	Driver-side air bag module circuit resistance low	—	—	C, D	×
B0001:55	Configuration setting error (driver-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55.)
B0003:53	―	Flashing	4	Operation (deployment) inhibited	—	—	C, D	×	(See DTC B0003:53.)
B0010:11	21		16	Passenger-side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A.)
B0010:12	Passenger-side air bag module circuit short to power supply	—	—	C, D	×
B0010:13	Passenger-side air bag module circuit open circuit or resistance high	—	—	C, D	×
B0010:19	Short circuit to passenger-side air bag module and other air bag module circuits	—	—	C, D	×
B0010:1A	Passenger-side air bag module circuit resistance low	—	—	C, D	×
B0010:55	Configuration setting error (passenger-side air bag module structural malfunction)	—	—	C, D	×	(See DTC B0001:55/B0010:55.)
B0094:11	42		9	Crash zone sensor circuit short to body ground	—	—	C, D	×	(See DTC B0094:11/B0094:13/B0094:87/B0094:96.)
B0094:13	Crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
B0094:87	Signal reception error from crash zone sensor	—	—	C, D	×
B0094:96	Crash zone sensor internal malfunction	—	—	C, D	×
B0094:55	Configuration setting error (crash zone sensor structural malfunction)	—	—	C, D	×	(See DTC B0094:55.)
B00D2:01	14		5	Air bag system warning light malfunction	—	—	C, D	×	(See DTC B00D2:01.)
B00D2:29	Invalid signal to air bag system warning light	—	—	C, D	×	(See DTC B00D2:29.)
B00D5:01	18		25	PAD OFF indicator circuit open circuit or short to power supply	—	—	C, D	×	(See DTC B00D5:01.)
B00D5:29	PAD indicator communication error	—	—	C, D	×	(See DTC B00D5:29.)
B1011:95	58		7	SAS control module connectors are poorly connected	—	—	C, D	×	(See DTC B1011:95.)
B10FD:11	43		13	Driver-side side air bag sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96.)
B10FD:13	Driver-side side air bag sensor circuit open circuit or resistance high	—	—	C, D	×
B10FD:87	Signal reception error from driver-side side air bag sensor	—	—	C, D	×
B10FD:96	Driver-side side air bag sensor internal malfunction	—	—	C, D	×
B10FD:55	Configuration setting error (driver-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55.)
B10FE:11	44		12	Passenger-side side air bag sensor circuit short to body ground or power supply	—	—	C, D	×	(See DTC B10FE:11/B10FE:13/B10FE:87/B10FE:96.)
B10FE:13	Passenger-side side air bag sensor circuit open circuit or resistance high	—	—	C, D	×
B10FE:87	Signal reception error from passenger-side side air bag sensor	—	—	C, D	×
B10FE:96	Passenger-side side air bag sensor internal malfunction	—	—	C, D	×
B10FE:55	Configuration setting error (passenger-side side air bag sensor structural malfunction)	—	—	C, D	×	(See DTC B10FD:55/B10FE:55.)
B1126:11	22		22	Driver-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A.)
B1126:12	Driver-side side air bag module circuit short to power supply	—	—	C, D	×
B1126:13	Driver-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1126:19	Short circuit to driver-side side air bag module and other air bag module circuits	—	—	C, D	×
B1126:1A	Driver-side side air bag module circuit resistance low	—	—	C, D	×
B1126:55	Configuration setting error (driver-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55.)
B1127:11	23		21	Passenger-side side air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A.)
B1127:12	Passenger-side side air bag module circuit short to power supply	—	—	C, D	×
B1127:13	Passenger-side side air bag module circuit open circuit or resistance high	—	—	C, D	×
B1127:19	Short circuit to passenger-side side air bag module and other air bag module circuits	—	—	C, D	×
B1127:1A	Passenger-side side air bag module circuit resistance low	—	—	C, D	×
B1127:55	Configuration setting error (passenger-side side air bag module structural malfunction)	—	—	C, D	×	(See DTC B1126:55/B1127:55.)
B1128:11	24		24	Driver-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A.)
B1128:12	Driver-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1128:13	Driver-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1128:19	Short circuit to driver-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1128:1A	Driver-side curtain air bag module circuit resistance low	—	—	C, D	×
B1128:55	Configuration setting error (driver-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55.)
B1129:11	25		23	Passenger-side curtain air bag module circuit short to body ground	—	—	C, D	×	(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A.)
B1129:12	Passenger-side curtain air bag module circuit short to power supply	—	—	C, D	×
B1129:13	Passenger-side curtain air bag module circuit open circuit or resistance high	—	—	C, D	×
B1129:19	Short circuit to passenger-side curtain air bag module and other air bag module circuits	—	—	C, D	×
B1129:1A	Passenger-side curtain air bag module circuit resistance low	—	—	C, D	×
B1129:55	Configuration setting error (passenger-side curtain air bag module structural malfunction)	—	—	C, D	×	(See DTC B1128:55/B1129:55.)
B1193:00	13		3	SAS control module operation (deployment)	—	—	C, D	×	(See DTC B1193:00.)
[B1196:13]	45		15	Driver-side side air bag sensor No.2 circuit open circuit or short to power supply	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1196:87]	Signal reception error from driver-side side air bag sensor No.2	—	—	C, D	×
[B1196:96]	Driver-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
[B1196:55]	Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×
[B1197:11]	46		14	Passenger-side side air bag sensor No.2 circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1197:13]	Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply	—	—	C, D	×
[B1197:87]	Signal reception error from passenger-side side air bag sensor No.2	—	—	C, D	×
[B1197:96]	Passenger-side side air bag sensor No.2 internal malfunction	—	—	C, D	×
[B1197:55]	Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)	—	—	C, D	×
B1202:01	18		25	PAD ON indicator circuit open circuit or short to power supply	—	—	C, D	×	(See DTC B1202:01.)
B1206:00	―	―	―	SAS control module operation (deployment) (fuel cut signal output)	―	―	C, D	×	(See DTC B1206:00/B143A:00/U2107:00.)
B1211:11	38		20	Driver-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A.)
B1211:12	Driver-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1211:13	Driver-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1211:19	Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1211:1A	Driver-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1211:55	Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55.)
B1214:11	39		19	Passenger-side pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A.)
B1214:12	Passenger-side pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
B1214:13	Passenger-side pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
B1214:19	Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
B1214:1A	Passenger-side pre-tensioner seat belt circuit resistance low	—	—	C, D	×
B1214:55	Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)	—	—	C, D	×	(See DTC B1211:55, B1214:55.)
[B1226:55]	36		11	Configuration setting error (driver-side pressure sensor structural malfunction)	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1227:55]	37		10	Configuration setting error (passenger-side pressure sensor structural malfunction)	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:11]	35		18	Lap pre-tensioner seat belt circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1228:12]	Lap pre-tensioner seat belt circuit short to power supply	—	—	C, D	×
[B1228:13]	Lap pre-tensioner seat belt circuit open circuit or resistance high	—	—	C, D	×
[B1228:19]	Short circuit to lap pre-tensioner seat belt and other air bag module circuits	—	—	C, D	×
[B1228:1A]	Lap pre-tensioner seat belt circuit resistance low	—	—	C, D	×
[B1228:55]	Configuration setting error (lap pre-tensioner seat belt structural malfunction)	—	—	C, D	×
[B1417:11]	41		8	Passenger-side crash zone sensor circuit short to body ground	—	—	C, D	×	(See Inspection for DTCs not usually displayed so the related function is not equipped.)
[B1417:13]	Passenger-side crash zone sensor circuit open circuit or short to power supply	—	—	C, D	×
[B1417:87]	Signal reception error from passenger-side crash zone sensor	—	—	C, D	×
[B1417:96]	Passenger-side crash zone sensor internal malfunction	—	—	C, D	×
[B1417:55]	Configuration setting error (passenger-side crash zone sensor structural malfunction)	—	—	C, D	×
B143A:00	―	―	―	SAS control module operation (collision detection) signal output	—	—	C, D	×	(See DTC B1206:00/B143A:00/U2107:00.)
B1D75:55	56		26	Configuration setting error (PAD switch structural malfunction)	—	—	C, D	×	(See DTC B1D75:55.)
B1D75:62	PAD switch circuit open circuit or short to body ground	—	—	C, D	×	(See DTC B1D75:62.)
C0061:29	―	―	―	Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)	—	—	C, D	×	(See DTC C0061:29/C0062:29/C0063:29/P0666:29.)
C0062:29	Low-G sensor (forward-G) in SAS control module (internal circuit disabled)	—	—	C, D	×
C0063:29	Yaw rate sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
P0666:29	Temperature sensor in SAS control module (internal circuit disabled)	—	—	C, D	×
U0001:88	14		5	Module communication error (HS-CAN)	—	—	C, D	×	(See DTC U0001:88/U0155:00.)
U0155:00	14		5	Communication error with instrument cluster	—	—	C, D	×	(See DTC U0001:88/U0155:00.)
U0300:00	54		6	Configuration setting invalid	—	—	C, D	×	(See DTC U0300:00/U2100:00.)
U2005:68	14		5	PCM communication error (vehicle speed signal)	—	—	C, D	×	(See DTC U2005:68.)
U2100:00	―	Flashing	4	Configuration not set	—	—	C, D	×	(See DTC U0300:00/U2100:00.)
U2107:00	―	―	―	SAS control module operation (deployment) signal output	―	―	C, D	×	(See DTC B1206:00/B143A:00/U2107:00.)
U3000:49	12		2	SAS control module internal malfunction	—	—	C, D	×	(See DTC U3000:49.)
U3003:16	―	Continuously illuminated	1	SAS control module power supply voltage decreases (less than 8 V)	—	—	C, D	×	(See DTC U3003:16/U3003:17.)
U3003:17	SAS control module power supply voltage increases (18 V or more)	—	—	C, D	×

DTC

System malfunction location

Fail-safe function

Drive cycle

Self test type^*1

Memory function

Page

M-MDS display

Air bag system warning light

Flashing pattern

Priority ranking

B0001:11

Driver-side air bag module circuit short to body ground

—

C, D

(See DTC B0001:11/B0001:12/B0001:13/B0001:19/B0001:1A.)

B0001:12

Driver-side air bag module circuit short to power supply

—

C, D

B0001:13

Driver-side air bag module circuit open circuit or resistance high

—

C, D

B0001:19

Short circuit to driver-side air bag module and other air bag module circuits

—

C, D

B0001:1A

Driver-side air bag module circuit resistance low

—

C, D

B0001:55

Configuration setting error (driver-side air bag module structural malfunction)

—

C, D

(See DTC B0001:55/B0010:55.)

B0003:53

―

Flashing

Operation (deployment) inhibited

—

C, D

(See DTC B0003:53.)

B0010:11

Passenger-side air bag module circuit short to body ground

—

C, D

(See DTC B0010:11/B0010:12/B0010:13/B0010:19/B0010:1A.)

B0010:12

Passenger-side air bag module circuit short to power supply

—

C, D

B0010:13

Passenger-side air bag module circuit open circuit or resistance high

—

C, D

B0010:19

Short circuit to passenger-side air bag module and other air bag module circuits

—

C, D

B0010:1A

Passenger-side air bag module circuit resistance low

—

C, D

B0010:55

Configuration setting error (passenger-side air bag module structural malfunction)

—

C, D

(See DTC B0001:55/B0010:55.)

B0094:11

Crash zone sensor circuit short to body ground

—

C, D

(See DTC B0094:11/B0094:13/B0094:87/B0094:96.)

B0094:13

Crash zone sensor circuit open circuit or short to power supply

—

C, D

B0094:87

Signal reception error from crash zone sensor

—

C, D

B0094:96

Crash zone sensor internal malfunction

—

C, D

B0094:55

Configuration setting error (crash zone sensor structural malfunction)

—

C, D

(See DTC B0094:55.)

B00D2:01

Air bag system warning light malfunction

—

C, D

(See DTC B00D2:01.)

B00D2:29

Invalid signal to air bag system warning light

—

C, D

(See DTC B00D2:29.)

B00D5:01

PAD OFF indicator circuit open circuit or short to power supply

—

C, D

(See DTC B00D5:01.)

B00D5:29

PAD indicator communication error

—

C, D

(See DTC B00D5:29.)

B1011:95

SAS control module connectors are poorly connected

—

C, D

(See DTC B1011:95.)

B10FD:11

Driver-side side air bag sensor circuit short to body ground or power supply

—

C, D

(See DTC B10FD:11/B10FD:13/B10FD:87/B10FD:96.)

B10FD:13

Driver-side side air bag sensor circuit open circuit or resistance high

—

C, D

B10FD:87

Signal reception error from driver-side side air bag sensor

—

C, D

B10FD:96

Driver-side side air bag sensor internal malfunction

—

C, D

B10FD:55

Configuration setting error (driver-side side air bag sensor structural malfunction)

—

C, D

(See DTC B10FD:55/B10FE:55.)

B10FE:11

Passenger-side side air bag sensor circuit short to body ground or power supply

—

C, D

(See DTC B10FE:11/B10FE:13/B10FE:87/B10FE:96.)

B10FE:13

Passenger-side side air bag sensor circuit open circuit or resistance high

—

C, D

B10FE:87

Signal reception error from passenger-side side air bag sensor

—

C, D

B10FE:96

Passenger-side side air bag sensor internal malfunction

—

C, D

B10FE:55

Configuration setting error (passenger-side side air bag sensor structural malfunction)

—

C, D

(See DTC B10FD:55/B10FE:55.)

B1126:11

Driver-side side air bag module circuit short to body ground

—

C, D

(See DTC B1126:11/B1126:12/B1126:13/B1126:19/B1126:1A.)

B1126:12

Driver-side side air bag module circuit short to power supply

—

C, D

B1126:13

Driver-side side air bag module circuit open circuit or resistance high

—

C, D

B1126:19

Short circuit to driver-side side air bag module and other air bag module circuits

—

C, D

B1126:1A

Driver-side side air bag module circuit resistance low

—

C, D

B1126:55

Configuration setting error (driver-side side air bag module structural malfunction)

—

C, D

(See DTC B1126:55/B1127:55.)

B1127:11

Passenger-side side air bag module circuit short to body ground

—

C, D

(See DTC B1127:11/B1127:12/B1127:13/B1127:19/B1127:1A.)

B1127:12

Passenger-side side air bag module circuit short to power supply

—

C, D

B1127:13

Passenger-side side air bag module circuit open circuit or resistance high

—

C, D

B1127:19

Short circuit to passenger-side side air bag module and other air bag module circuits

—

C, D

B1127:1A

Passenger-side side air bag module circuit resistance low

—

C, D

B1127:55

Configuration setting error (passenger-side side air bag module structural malfunction)

—

C, D

(See DTC B1126:55/B1127:55.)

B1128:11

Driver-side curtain air bag module circuit short to body ground

—

C, D

(See DTC B1128:11/B1128:12/B1128:13/B1128:19/B1128:1A.)

B1128:12

Driver-side curtain air bag module circuit short to power supply

—

C, D

B1128:13

Driver-side curtain air bag module circuit open circuit or resistance high

—

C, D

B1128:19

Short circuit to driver-side curtain air bag module and other air bag module circuits

—

C, D

B1128:1A

Driver-side curtain air bag module circuit resistance low

—

C, D

B1128:55

Configuration setting error (driver-side curtain air bag module structural malfunction)

—

C, D

(See DTC B1128:55/B1129:55.)

B1129:11

Passenger-side curtain air bag module circuit short to body ground

—

C, D

(See DTC B1129:11/B1129:12/B1129:13/B1129:19/B1129:1A.)

B1129:12

Passenger-side curtain air bag module circuit short to power supply

—

C, D

B1129:13

Passenger-side curtain air bag module circuit open circuit or resistance high

—

C, D

B1129:19

Short circuit to passenger-side curtain air bag module and other air bag module circuits

—

C, D

B1129:1A

Passenger-side curtain air bag module circuit resistance low

—

C, D

B1129:55

Configuration setting error (passenger-side curtain air bag module structural malfunction)

—

C, D

(See DTC B1128:55/B1129:55.)

B1193:00

SAS control module operation (deployment)

—

C, D

(See DTC B1193:00.)

[B1196:13]

Driver-side side air bag sensor No.2 circuit open circuit or short to power supply

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1196:87]

Signal reception error from driver-side side air bag sensor No.2

—

C, D

[B1196:96]

Driver-side side air bag sensor No.2 internal malfunction

—

C, D

[B1196:55]

Configuration setting error (driver-side side air bag sensor No.2 structural malfunction)

—

C, D

[B1197:11]

Passenger-side side air bag sensor No.2 circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1197:13]

Passenger-side side air bag sensor No.2 circuit open circuit or short to power supply

—

C, D

[B1197:87]

Signal reception error from passenger-side side air bag sensor No.2

—

C, D

[B1197:96]

Passenger-side side air bag sensor No.2 internal malfunction

—

C, D

[B1197:55]

Configuration setting error (passenger-side side air bag sensor No.2 structural malfunction)

—

C, D

B1202:01

PAD ON indicator circuit open circuit or short to power supply

—

C, D

(See DTC B1202:01.)

B1206:00

―

SAS control module operation (deployment) (fuel cut signal output)

―

C, D

(See DTC B1206:00/B143A:00/U2107:00.)

B1211:11

Driver-side pre-tensioner seat belt circuit short to body ground

—

C, D

(See DTC B1211:11/B1211:12/B1211:13/B1211:19/B1211:1A.)

B1211:12

Driver-side pre-tensioner seat belt circuit short to power supply

—

C, D

B1211:13

Driver-side pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

B1211:19

Short circuit to driver-side pre-tensioner seat belt and other air bag module circuits

—

C, D

B1211:1A

Driver-side pre-tensioner seat belt circuit resistance low

—

C, D

B1211:55

Configuration setting error (driver-side pre-tensioner seat belt structural malfunction)

—

C, D

(See DTC B1211:55, B1214:55.)

B1214:11

Passenger-side pre-tensioner seat belt circuit short to body ground

—

C, D

(See DTC B1214:11/B1214:12/B1214:13/B1214:19/B1214:1A.)

B1214:12

Passenger-side pre-tensioner seat belt circuit short to power supply

—

C, D

B1214:13

Passenger-side pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

B1214:19

Short circuit to passenger-side pre-tensioner seat belt and other air bag module circuits

—

C, D

B1214:1A

Passenger-side pre-tensioner seat belt circuit resistance low

—

C, D

B1214:55

Configuration setting error (passenger-side pre-tensioner seat belt structural malfunction)

—

C, D

(See DTC B1211:55, B1214:55.)

[B1226:55]

Configuration setting error (driver-side pressure sensor structural malfunction)

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1227:55]

Configuration setting error (passenger-side pressure sensor structural malfunction)

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1228:11]

Lap pre-tensioner seat belt circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1228:12]

Lap pre-tensioner seat belt circuit short to power supply

—

C, D

[B1228:13]

Lap pre-tensioner seat belt circuit open circuit or resistance high

—

C, D

[B1228:19]

Short circuit to lap pre-tensioner seat belt and other air bag module circuits

—

C, D

[B1228:1A]

Lap pre-tensioner seat belt circuit resistance low

—

C, D

[B1228:55]

Configuration setting error (lap pre-tensioner seat belt structural malfunction)

—

C, D

[B1417:11]

Passenger-side crash zone sensor circuit short to body ground

—

C, D

(See Inspection for DTCs not usually displayed so the related function is not equipped.)

[B1417:13]

Passenger-side crash zone sensor circuit open circuit or short to power supply

—

C, D

[B1417:87]

Signal reception error from passenger-side crash zone sensor

—

C, D

[B1417:96]

Passenger-side crash zone sensor internal malfunction

—

C, D

[B1417:55]

Configuration setting error (passenger-side crash zone sensor structural malfunction)

—

C, D

B143A:00

―

SAS control module operation (collision detection) signal output

—

C, D

(See DTC B1206:00/B143A:00/U2107:00.)

B1D75:55

Configuration setting error (PAD switch structural malfunction)

—

C, D

(See DTC B1D75:55.)

B1D75:62

PAD switch circuit open circuit or short to body ground

—

C, D

(See DTC B1D75:62.)

C0061:29

―

Low-G sensor (lateral-G) in SAS control module (internal circuit disabled)

—

C, D

(See DTC C0061:29/C0062:29/C0063:29/P0666:29.)

C0062:29

Low-G sensor (forward-G) in SAS control module (internal circuit disabled)

—

C, D

C0063:29

Yaw rate sensor in SAS control module (internal circuit disabled)

—

C, D

P0666:29

Temperature sensor in SAS control module (internal circuit disabled)

—

C, D

U0001:88

Module communication error (HS-CAN)

—

C, D

(See DTC U0001:88/U0155:00.)

U0155:00

Communication error with instrument cluster

—

C, D

(See DTC U0001:88/U0155:00.)

U0300:00

Configuration setting invalid

—

C, D

(See DTC U0300:00/U2100:00.)

U2005:68

PCM communication error (vehicle speed signal)

—

C, D

(See DTC U2005:68.)

U2100:00

―

Flashing

Configuration not set

—

C, D

(See DTC U0300:00/U2100:00.)

U2107:00

―

SAS control module operation (deployment) signal output

―

C, D

(See DTC B1206:00/B143A:00/U2107:00.)

U3000:49

SAS control module internal malfunction

—

C, D

(See DTC U3000:49.)

U3003:16

―

Continuously illuminated

SAS control module power supply voltage decreases (less than 8 V)

—

C, D

(See DTC U3003:16/U3003:17.)

U3003:17

SAS control module power supply voltage increases (18 V or more)

—

C, D

Step	Inspection		Action
1	INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY • Is any DTC not within [ ] in the DTC table displayed simultaneously?	Yes	Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE.)
No	Go to the next step.
2	VERIFY IF MALFUNCTION CAUSED BY TEMPORARY MALFUNCTION IN SAS CONTROL MODULE • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION.) • Are the same DTCs displayed?	Yes	Go to the next step.
No	DTC troubleshooting completed.
3	VERIFY IF MALFUNCTION CAUSED BY CONFIGURATION ERROR • Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA).) • Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.) • Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION.) • Are the same DTCs displayed?	Yes	Re-perform the configuration, then perform the DTC inspection. • If the same DTC is displayed, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)
No	DTC troubleshooting completed.

Step

Inspection

Action

INSPECT FOR ANY DTC DISPLAYED SIMULTANEOUSLY

• Is any DTC not within [ ] in the DTC table displayed simultaneously?

Yes

Repair the malfunctioning part according to the applicable DTC troubleshooting. (See DTC TABLE.)

Go to the next step.

VERIFY IF MALFUNCTION CAUSED BY TEMPORARY MALFUNCTION IN SAS CONTROL MODULE

• Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.)

• Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION.)

• Are the same DTCs displayed?

Yes

Go to the next step.

DTC troubleshooting completed.

VERIFY IF MALFUNCTION CAUSED BY CONFIGURATION ERROR

• Perform the SAS control module configuration using the M-MDS. (See SAS CONTROL MODULE CONFIGURATION (USING AS-BUILT DATA).)

• Clear the DTC for the SAS control module using the M-MDS. (See CLEARING DTC.)

• Perform the DTC inspection for the SAS control module using the M-MDS. (See DTC INSPECTION.)

• Are the same DTCs displayed?

Yes

Re-perform the configuration, then perform the DTC inspection.

• If the same DTC is displayed, replace the SAS control module. (See SAS CONTROL MODULE REMOVAL/INSTALLATION.)

DTC troubleshooting completed.