FRONT COMBINATION LIGHT DISASSEMBLY/ASSEMBLY

id091800816000

1.  Disassemble in the order shown in the figure.

Without discharge headlight system

am3zzw00013887

1	Short-cord (See Short Cord Removal Note.)
2	Parking light bulb (See PARKING LIGHT BULB REMOVAL/INSTALLATION.)
3	Headlight LO bulb (See HEADLIGHT BULB REMOVAL/INSTALLATION.)
4	Cover No.1 (See Cover Installation Note.)
5	Cover No.2 (See Cover Installation Note.)
6	Headlight HI bulb (See HEADLIGHT BULB REMOVAL/INSTALLATION.)
7	Cover No.2 (See Cover Installation Note.)
8	Front combination light

With discharge headlight system

am3uuw00010509

1	Short-cord (See Short Cord Removal Note.)
2	Cover (See Cover Installation Note.)
3	Igniter (See IGNITER REMOVAL/INSTALLATION.)
4	Headlight HI/LO bulb (See HEADLIGHT BULB REMOVAL/INSTALLATION.)
5	Discharge headlight control module (See DISCHARGE HEADLIGHT CONTROL MODULE REMOVAL/INSTALLATION.)
6	Front combination light

2.  Assemble in the reverse order of disassembly.

Short Cord Removal Note

1.  While pressing the clip tabs in the direction of arrows (1) shown in the figure, press the clip in the direction of arrow (2) to detach the clip tabs from the front combination light.

am3uuw00010510

2.  Pull the clip out of the front combination light and remove the short cord.

Cover Installation Note

1.  Install the cover to the housing so that there is no gap between the housing and the cover.

Caution

•  If there is a gap between the housing and the cover, water may penetrate through the gap, causing a front combination light malfunction. Verify that there is no gap between the cover and the housing.

am3uuw00010511