KEYLESS ANTENNA REMOVAL/INSTALLATION

id091400514900

With Advanced Keyless Entry System

Vehicle interior, front

1. Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

2. Remove the following parts:

(1) Upper panel (See UPPER PANEL REMOVAL.) (See UPPER PANEL INSTALLATION.)

(2) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

(3) Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F66M-R].)

(4) Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(5) Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(6) Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(7) CD player (with CD player) (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.)

(8) DVD/CD player (with DVD/CD player) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)

(9) Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(10) Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(11) Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)

3. While pressing the keyless antenna bracket tab in the direction of arrow (1) shown in the figure, press it in the direction of arrow (2) to detach the keyless antenna bracket tab from the instrument panel.

am3zzw00013905

4. Remove the keyless antenna from the instrument panel.

5. Disconnect the connector from the keyless antenna.

am3uuw00009938

6. Insert a tape-wrapped flathead screwdriver into the position shown in the figure.

am3uuw00009939

7. Move the tape-wrapped flathead screwdriver in the direction of arrow (3) shown in the figure to press the keyless antenna bracket tab, and pull it in the direction of arrow (4) to detach the keyless antenna bracket from the keyless antenna.

8. Remove the keyless antenna bracket from the keyless antenna.

9. Install in the reverse order of removal.

Vehicle interior, rear

2. Remove the trunk covering. (See TRUNK COVERING REMOVAL/INSTALLATION.)

3. Remove the trunk board. (See TRUNK BOARD REMOVAL/INSTALLATION.)

4. Disconnect the connector from the keyless antenna.

am3uuw00009940

Caution

• Disconnect the connector while holding the keyless antenna, otherwise the keyless antenna bracket could be damaged.

5. While pressing the keyless antenna bracket tab in the direction of arrow (1) shown in the figure, press it in the direction of arrow (2) to detach the keyless antenna bracket tab from the body.

am3uuw00009941

6. Remove the keyless antenna from the body.

7. Insert a tape-wrapped flathead screwdriver into the position shown in the figure.

am3uuw00009939

8. Move the tape-wrapped flathead screwdriver in the direction of arrow (3) shown in the figure to press the keyless antenna bracket tab, and pull it in the direction of arrow (4) to detach the keyless antenna bracket from the keyless antenna.

9. Remove the keyless antenna bracket from the keyless antenna.

10. Install in the reverse order of removal.

Vehicle exterior, rear

2. Disconnect the connector from the keyless antenna.

am3uuw00009942

Caution

• Disconnect the connector while holding the keyless antenna, otherwise the keyless antenna bracket could be damaged.

3. While pressing the keyless antenna bracket tab in the direction of arrow (1) shown in the figure, press it in the direction of arrow (2) to detach the keyless antenna bracket tab from the bracket.

am3uuw00009943

4. Remove the keyless antenna from the bracket.

5. Insert a tape-wrapped flathead screwdriver into the position shown in the figure.

am3uuw00009939

6. Move the tape-wrapped flathead screwdriver in the direction of arrow (3) shown in the figure to press the keyless antenna bracket tab, and pull it in the direction of arrow (4) to detach the keyless antenna bracket from the keyless antenna.

7. Remove the keyless antenna bracket from the keyless antenna.

8. Install in the reverse order of removal.

Vehicle exterior, driver's side/passenger's side

Note

• The keyless antenna (vehicle exterior, driver's side/passenger's side) cannot be removed as a single unit because it is built into the front outer handle. To replace the keyless antenna (vehicle exterior, driver's side/passenger's side), replace the front outer handle. (See FRONT OUTER HANDLE REMOVAL/INSTALLATION.)

am3uuw00009944

With Keyless Entry System

Vehicle interior, center

2. Remove the following parts:

(1) Upper panel (See UPPER PANEL REMOVAL.) (See UPPER PANEL INSTALLATION.)

(2) Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

3. Disconnect the connector from the keyless antenna.

am3uuw00009945

Caution

• Disconnect the connector while holding the keyless antenna, otherwise the keyless antenna bracket could be damaged.

4. While pressing the keyless antenna bracket tab in the direction of arrow (1) shown in the figure, press it in the direction of arrow (2) to detach the keyless antenna bracket tab from the bracket.

am3uuw00009946

5. Remove the keyless antenna from the bracket.

6. Insert a tape-wrapped flathead screwdriver into the position shown in the figure.

am3uuw00009939

8. Remove the keyless antenna bracket from the keyless antenna.

9. Install in the reverse order of removal.