REAR WASHER HOSE REMOVAL/INSTALLATION

id091900801600

Rear Washer Hose A

1.  Slightly bend back the front under cover No.1. (See FRONT UNDER COVER No.1 REMOVAL/INSTALLATION.)

2.  Remove the front splash shield No.2 (RH). (See SPLASH SHIELD REMOVAL/INSTALLATION.)

3.  Remove the front mudguard (RH). (See MUDGUARD REMOVAL/INSTALLATION.)

4.  Disconnect rear washer hose A from the washer motor.

am3zzw00015802

5.  Remove rear washer hose A from washer tank hook. (See Rear washer hose A installation note.)

6.  Pull out rear washer hose A from area A of the washer tank.

7.  Remove rear washer hose A from the clip.

8.  Disconnect rear washer hose B from joint pipe A.

9.  Remove rear washer hose A.

10.  Install in the reverse order of removal.

Rear washer hose A installation note

•  VIN: Except 3MZ

―  When installing rear washer hose A to the washer tank hook, align the upper part of the yellow mark with the hook and install.

am3zzw00015803

•  VIN: 3MZ

―  When installing rear washer hose A to the washer tank hook, align the upper part of the gray mark with the hook and install.

am3zzw00015804

Rear Washer Hose B

1.  Slightly bend back the front under cover No.1. (See FRONT UNDER COVER No.1 REMOVAL/INSTALLATION.)

2.  Remove the front splash shield No.2 (RH). (See SPLASH SHIELD REMOVAL/INSTALLATION.)

3.  Remove the front mudguard (RH). (See MUDGUARD REMOVAL/INSTALLATION.)

4.  Disconnect rear washer hose B from joint pipe A.

am3uuw00012116

5.  Remove rear washer hose B from the clip.

6.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

7.  Remove the following parts:

(1)  Front scuff plate (RH) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(2)  Front side trim (RH) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(3)  Glove compartment (L.H.D.) (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(4)  Dashboard under cover (L.H.D.) (See DASHBOARD UNDER COVER REMOVAL/INSTALLATION.)

(5)  Bluetooth unit (without center display, with Bluetooth system) (See Bluetooth® UNIT REMOVAL/INSTALLATION.)

(6)  Tuner and amp unit (with center display) (See TUNER AND AMP UNIT (TAU) REMOVAL/INSTALLATION.)

(7)  A-pillar trim (RH) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

8.  Remove the grommet from the body.

am3uuw00010592

9.  Remove rear washer hose B from clips A and B.

10.  Disconnect rear washer hose C from joint pipe D.

11.  Remove rear washer hose B.

12.  Install in the reverse order of removal.

Rear Washer Hose C

1.  Set the wheel blocks for both the front and rear wheels.

2.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5].)

3.  Shift the selector lever from the P position to the D position (ATX).

4.  Remove the sunroof seaming welt. (with sunroof system)

5.  Remove the following parts:

(1)  A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(2)  Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)

(3)  Front map light (dual light type) (See FRONT MAP LIGHT REMOVAL/INSTALLATION.)

(4)  Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)

(5)  Front scuff plate (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(6)  Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(7)  B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(8)  Adjust anchor cover (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(9)  Upper anchor installation bolt on the seat belt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(10)  B-pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

6.  Set the tire house trim aside. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

7.  Remove the following parts:

(1)  Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)

(2)  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(3)  Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION.)

(4)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(5)  Trunk side upper trim (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(6)  Trunk side trim (LH only) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

(7)  C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(8)  Upper panel (See UPPER PANEL REMOVAL.) (See UPPER PANEL INSTALLATION.)

(9)  Rear console (See REAR CONSOLE REMOVAL/INSTALLATION.)

(10)  Shift lever knob (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F66M-R].)

(11)  Selector lever knob (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

(12)  Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION.)

(13)  Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION.)

(14)  CD player (with CD player) (See CD PLAYER REMOVAL.) (See CD PLAYER INSTALLATION.)

(15)  DVD/CD player (with DVD/CD player) (See DVD/CD PLAYER REMOVAL.) (See DVD/CD PLAYER INSTALLATION.)

(16)  Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(17)  Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(18)  Side wall (See SIDE WALL REMOVAL/INSTALLATION.)

(19)  Front console (See FRONT CONSOLE REMOVAL/INSTALLATION.)

8.  Set the selector lever component aside. (ATX) (See AUTOMATIC TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION.)

9.  Set the shift lever component aside. (MTX) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F35M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [C66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [D66M-R].) (See MANUAL TRANSAXLE SHIFT MECHANISM REMOVAL/INSTALLATION [F66M-R].)

10.  Remove the headliner. (See HEADLINER REMOVAL/INSTALLATION.)

11.  Remove the tape.

Without sunroof

am3uuw00010593

With sunroof

am3uuw00010594

12.  Remove rear washer hose C from the clip.

13.  Remove rear washer hose C. (See Rear washer hose C installation note.)

14.  Install in the reverse order of removal.

Rear washer hose C installation note

1.  When installing rear washer hose C to the headliner, cut rear washer hose C according to the following dimensions.

Without sunroof

am3uuw00010595

With sunroof

am3zzw00015343

Rear Washer Hose D

1.  Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [MZR 1.6].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-G 1.5, SKYACTIV-G 2.0, SKYACTIV-G 2.5].) (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 2.2].)(See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION [SKYACTIV-D 1.5],)

2.  Remove the following parts:

(1)  Rear package tray (See REAR PACKAGE TRAY REMOVAL/INSTALLATION.)

(2)  Trunk covering (See TRUNK COVERING REMOVAL/INSTALLATION.)

(3)  Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

3.  Set the tire house trim aside. (See TIRE HOUSE TRIM REMOVAL/INSTALLATION.)

4.  Remove the following parts:

(1)  Trunk side upper trim (See TRUNK SIDE UPPER TRIM REMOVAL/INSTALLATION.)

(2)  C pillar trim (RH) (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)  Liftgate upper trim (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

5.  Partially peel back the headliner. (See HEADLINER REMOVAL/INSTALLATION.)

6.  Disconnect rear washer hose C from joint pipe E.

am3uuw00010597

7.  Remove the tape.

8.  Partially peel the liftgate grommet.

am3uuw00010598

9.  While pressing the tab of the liftgate grommet inner in the direction of arrow (1) shown in the figure using the remover tool, pull the liftgate grommet inner in the direction of arrow (2) shown in the figure to detach the tab of the liftgate grommet inner from the liftgate.

am3uuw00010599

10.  Detach all the tabs of the liftgate grommet inner from the liftgate and remove the liftgate grommet inner.

11.  Disconnect rear washer hose D from the rear washer nozzle.

am3uuw00010600

12.  Disconnect rear washer hose D from joint pipe F.

13.  Remove rear washer hose D.

14.  Install in the reverse order of removal.